SRX AWD V8-4.6L VIN A (2004)
11.
Remove the console side trim panels (1) from the console.
12.
Remove the 6 screws (1) securing the console to the floor.
13.
Remove the console from the vehicle.
14.
Remove the connector position assurance (CPA) (1) from the wiring harness connector (2) to the inflatable restraint sensing and diagnostic module
(SDM).
15.
Push the flex lock button (3) down and move the sliding connector locking cover (4) to the OPEN position.
Important:
The SDM is shown with the carpet removed for illustration purposes only. Removal of the front carpet or the front seats is not necessary to
service the SDM.
