SRX AWD V8-4.6L VIN A (2004)
2.
Install the SDM (1) horizontally to the console floor.
3.
Point the arrow on the 5DM toward the front of the vehicle.
4.
Install the SDM mounting fasteners (2).
Tighten
Tighten the fasteners to 9 Nm (80 lb-in).
5.
Connect the wiring harness connector (1) to the SDM.
6.
Push the flex lock button (3) down and move the sliding connector locking cover (4) to the CLOSE position.
7.
Install the CPA (1) to the wiring harness connector (2) to the inflatable restraint SDM.
8.
Position the console on the floor of the vehicle.
