SRX AWD V8-4.6L VIN A (2004)
Inflatable Restraint Sensing And Diagnostic Module: Description and Operation
INFLATABLE RESTRAINT SENSING AND DIAGNOSTIC MODULE (SDM)
The sensing and diagnostic module (SDM) is a microprocessor and the control center for the SIR system. The SDM contains internal sensors along with
several external sensors, if equipped, mounted at strategic locations on the vehicle. In the event of a collision, the SDM compares the signals from the
internal and external sensors to a value stored in memory. When the generated signals exceed the stored value, the SDM will cause current to flow
through the appropriate deployment loops to deploy the air bags. The SDM records the SIR system status when a deployment occurs and turns the AIR
BAG indicator located in the IPC ON. The SDM performs continuous diagnostic monitoring of the SIR system electrical components and circuitry when
the ignition is turned ON. If the SDM detects a malfunction, a DTC will be stored and the SDM will command the AIR BAG indicator ON, notifying the
driver that a malfunction exist. In the event that ignition positive voltage is lost during a collision, the SDM maintains a 23-volt loop reserve (23 VLR)
for deployment of the air bags. It is important when disabling the SIR system for servicing or rescue operations to allow the 23 VLR to dissipate, which
could take up to 1 minute.
INFLATABLE RESTRAINT SEAT BELT PRETENSIONER
The seat belt pretensioner modules contain a housing, an initiating device, canister of gas generating material. The initiator is part of the seat belt
pretensioner deployment loop. When the vehicle is involved in a collision of sufficient force, the SDM will cause current to flow through the deployment
loops to the initiator. Current passing through the initiator ignites the material in the canister producing a rapid generation of gas and the release of
compressed gas, if present. The gas produced from this reaction rapidly shortens the seat belt buckle height.
Each seat belt pretensioner is equipped with a shorting bar located on the connector of the pretensioner. The shorting bar shorts the seat belt pretensioner
deployment loop circuitry to prevent unwanted deployment of the pretensioner when servicing the seat belt pretensioner.
