SRX AWD V8-4.6L VIN A (2004)
IMPORTANT: Do not refinish previously painted sensors.
1. Paint the new rear object sensor. Refer to Basecoat/Clearcoat Paint Systems in Paint/Coatings.
2. Inspect the paint thickness to ensure it does not exceed 6 mm using a paint thickness gauge suitable for non-ferrous metals. Refer to Paint Gages in
Paint/Coatings.
3. Align the keyhole (2) with the key (1) and press the rear object sensor bezel flush to the fascia.
4. Install the housing to the cutouts on the bezel through the back side of the fascia.
IMPORTANT: The spring keys must be on the top and bottom of the housing.