SRX AWD V8-4.6L VIN A (2004)
Crankshaft Position Sensor: Description and Operation
CRANKSHAFT POSITION (CKP) SENSOR
The CKP sensor is a hall-effect sensor. An integrated circuit (IC) magnetic sensing element inside the sensor is magnetically biased by a permanent
magnet located within the sensor. The CKP sensor circuits consist of a 12-volt reference circuit, a low reference circuit, and a signal circuit. The CKP
sensor produces a DC voltage of varying amplitude and frequency. The frequency depends on the velocity of the crankshaft and the DC output voltage
depends on the crankshaft position and battery voltage. The CKP sensor works in conjunction with a 58-tooth reluctor wheel attached to the crankshaft.
As each reluctor wheel tooth rotates past the CKP sensor, the resulting change in the magnetic field is used by the sensor electronics to produce a digital
output pulse. The sensor returns a digital ON/OFF pulse 58 times per crankshaft revolution. The ECM processes the digital pulse to create a signature
pattern that enables the ECM to determine the crankshaft position. The CMP sensor signal is used to determine the position of the valve train relative to
the crankshaft position. The ECM can synchronize the ignition timing, the fuel injector timing, and the spark knock control based on the CKP sensor and
CMP sensor inputs. The CKP sensor is also used to detect misfire.
CRANKSHAFT RELUCTOR WHEEL
The crankshaft reluctor wheel is part of the crankshaft. The reluctor wheel consists of 58 teeth and a reference gap. Each tooth on the reluctor wheel is
spaced 6 degrees apart with a 12-degree space for the reference gap. The reference gap is used to determine the crankshaft position, while the other
teeth provide cylinder location during a revolution.
