SRX AWD V8-4.6L VIN A (2004)
Negative: Service and Repair
Replacement procedure
BATTERY NEGATIVE CABLE REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT:
-
Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
-
Always route the replacement cable the same as the original cable.
1. Disconnect the battery negative cable.
2. Remove the fuel injector sight shield.
3. Disconnect the cable retaining clip from the stud on the shock tower.
4. Remove the bolt securing the battery negative cable to the shock tower.
5. Disconnect the instrument panel harness connector from the battery negative cable.
6. Disconnect the cable retaining clips from the engine bracket.