SRX AWD V8-4.6L VIN A (2004)
7. Lower the vehicle.
8. Install the upper generator mounting bolts.
Tighten
Tighten the generator mounting bolts in the sequence shown to 50 N.m (37 lb ft).
9. Raise and support the vehicle. Refer to Vehicle Lifting.
10. Install a new tie strap to secure the wiring harness to the generator.
11. Install the right and left side stabilizer shaft links to the lower control arm.
12. Install the right side wheelhouse liner.
13. Install the front wheels.
14. Install the front air deflector.
16. Install the generator drive belt.
17. Connect the battery negative cable.