SRX AWD V8-4.6L VIN A (2004)
Auxiliary Power Outlet: Service and Repair
Cigar Lighter or 12 Volt Accessory Power Receptacle Replacement
CIGAR LIGHTER HOUSING OR 12 VOLT ACCESSORY POWER RECEPTACLE REPLACEMENT
TOOLS REQUIRED
J 42059 Cigar Lighter Socket Remover
REMOVAL PROCEDURE
1. Remove the cigar lighter fuse.
2. Remove the cigar lighter element.
3. Remove the cigar lighter housing by placing one side of the T portion of J 42059 into the tab window and the other side into the opposite tab
window. Pull the lighter housing straight out.
4. Remove the tool from the lighter housing.
5. Pull the housing (3) and the retainer (2) out of the ash tray.
6. Disconnect the electrical connector (1) from the housing.
7. Remove the retainer from the housing.
INSTALLATION PROCEDURE