SRX AWD V8-4.6L VIN A (2004)
Front Steering Knuckle: Service and Repair
Steering Knuckle Replacement
^
Tools Required
-
J 24319-B Universal Steering Linkage Puller
-
J 43631 Ball Joint Remover
Removal Procedure
Notice: Do not free the ball stud by using a pickle fork or a wedge-type tool. Damage to the seal or bushing may result.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the wheel bearing/hub.
4. Remove the outer tie rod to steering knuckle retaining nut.
5. Using the J 24319-B , disconnect the tie rod from the steering knuckle.