SRX AWD V8-4.6L VIN A (2004)
Control Arm: Service and Repair
Front Suspension
The content of this article reflects the changes identified in TSB- 06-03-08-007 dated May 18, 2006.
Lower Control Arm Replacement
^
Tools Required
-
J 43631 Ball Joint Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the shock module yoke.
4. Remove the stabilizer shaft link lower retaining nut.
5. Remove the stabilizer shaft link from the lower control arm.
6. Remove the ABS wire harness from the lower control arm.
7. Remove the lower control arm to steering knuckle nut.
