SRX AWD V8-4.6L VIN A (2004)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Actuator Replacement
Removal Procedure
1. Remove the shift control trim plate by lifting the rear of the trim plate up then pull the plate rearward in order to release the front retaining tabs.
2. Remove the center console assembly.
3. Disconnect the wiring harness connector (3) from the shift lock control pigtail connector.
4. Remove the shift indicator lamp sockets (1 and 2) from the shift indicator by rotating the lamp sockets one quarter turn. Note: it may be easier to
remove the shift indicator in order to access the lamp sockets.