SRX AWD V8-4.6L VIN A (2004)
Brake Switch - TCC: Service and Repair
Automatic Transmission - 5L50-E
Torque Converter Clutch/Cruise Control Release Switch Replacement
Removal Procedure
1. Remove the left closeout/insulator panel.
2. Remove the torque converter clutch/cruise release switch (3) by pulling the upper switch out of the retainer.
3. Disconnect the electrical connector from the torque converter clutch/cruise release switch (3).
Installation Procedure
1. Connect the electrical connector to the torque converter clutch/cruise release switch (3).
2. Install the torque converter clutch/cruise release switch (3) into the upper retainer.
3. Adjust the torque converter clutch/cruise release switch.
4. Install the left closeout/insulator panel.
