SRX AWD V8-4.6L VIN A (2004)
Shift Linkage: Service and Repair
Automatic Transmission - 5L40-E
Floor Shift Control Replacement
Floor Shift Control Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the shift control linkage adjustment nut.
3. Disconnect the shift control linkage rod from the shift control assembly.
4. Lower the vehicle.
5. Remove the shift control trim plate by lifting the rear of the trim plate up then pull the plate rearward in order to disengage the front retaining tabs.
6. Remove the center console assembly.
7. Remove the electrical connector (1) from the shift control assembly.
