SRX AWD V8-4.6L VIN A (2004)
6.2.
Push down on the tip of the park override and rotate the pawl stopper clockwise until it is in position.
7.
Replace the foam bushing on the end of the BTSI solenoid rod with the new bushing from the kit.
8.
Install the BTSI solenoid, making sure that the rod and the foam are properly engaged in the pawl stopper.
9.
Install the shifter lever assembly. Refer to Transmission Control Replacement in SI.
10.
Make sure that the transmission shift linkage is properly adjusted. Refer to Shift Control Linkage Adjustment in SI.