SRX AWD V8-4.6L VIN A (2004)
Caution:
The BTSI solenoid cradle tabs are fragile. Do NOT attempt to aggressively pry the retention tabs away from the BTSI solenoid.
Note:
Do not disconnect the wire connector to the solenoid.
3.
Remove the BTSI solenoid by gently separating the retention tabs and lifting the solenoid out of the cradle.
Notice:
Do not loosen the screws (1) more than two turns. Do not remove the screws (1) retaining the BTSI solenoid cradle and pawl stopper
assembly.
4.
Loosen the two screws (1) retaining the BTSI solenoid cradle and pawl stopper assembly two (2) turns.
