SRX AWD V8-4.6L VIN A (2004)
7.2.
Push down on the tip of the park override and rotate the pawl stopper clockwise until it is in position.
8.
Retighten the two screws retaining the BTSI solenoid cradle and pawl stopper assembly.
Tighten
Tighten the two screws retaining the BTSI solenoid cradle and pawl stopper to 5 Nm (44 lb in).
9.
Replace the foam bushing on the end of the BTSI solenoid rod with the new bushing from the kit.