SRX AWD V8-4.6L VIN A (2004)
9. Important:
Replace the cup plug only if leaking.
Using a small screwdriver, remove and discard the cup plug.
10. Important:
Removal of the transmission from the vehicle is NOT required for removal or replacement of the shift shaft position switch. Remove the
transmission from the vehicle and refer to Unit Repair for replacement of the manual shift shaft ONLY if replacement of the manual shift shaft (3)
is necessary.
Remove the transmission fluid pan and filter.
11. Disconnect the electrical connector from the manual shift shaft position switch.
12. Using a suitable pin punch (1), remove the manual shift shaft position switch retaining pin (2).
13. Remove the manual shift shaft detent spring (1) and bolts (2).
14. Position a suitable transmission jack under the transmission support.
15. Remove the transmission support from the body ONLY.
