SRX AWD V8-4.6L VIN A (2004)
7. Important:
If the bolts are tightened at random, valve bores may become distorted and inhibit proper valve operation.
Notice:
^
Tighten the control valve body assembly bolts in sequence.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
8. Install a 0.8 mm spacer (2) between the manual shaft detent lever (1) and the manual shaft detent spring (3).
9. Tighten the detent spring bolts.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
10. Remove the spacer (2).
11. Connect the internal electrical wiring harness connectors to all internal electrical components (1-8).
12. Install the transmission fluid pan and filter.
