SRX AWD V8-4.6L VIN A (2004)
8. Remove the guide pins.
9. Install NEW ring gear bolts.
^
Tighten the ring gear bolts to 67 Nm (49 ft. lbs.) in a criss-cross pattern.
10. Install the pinion head bearing (14) onto the drive pinion gear (111) using J 24433 and a hydraulic press.
11. Assemble the drive pinion shaft (111) and pinion bearing spacer (12) through the pinion bearing housing (3) with the tail bearing (7) over the
pinion shaft.