SRX AWD V8-4.6L VIN A (2004)
1. Remove the pinion flange nut (1) using J 34826 while holding the flange with the J 45012 and a breaker bar.
2. Remove the pinion flange from the shaft. If the flange will not pull off, use the J 45019 with forcing screw, bolts and spacers.
3. Place the pinion cage into a press.
4. Remove the pinion shaft and bearing from the cage using the J 45006 and a hydraulic press.
5. Remove the spacer from the pinion shaft.
