SRX AWD V8-4.6L VIN A (2004)
Control Module: Service and Repair
5L40-E
Transmission Control Module (TCM) Replacement
Transmission Control Module (TCM) Replacement
Removal Procedure
1. Unlock the transmission control module electrical connector by pulling the retainer (2) away from the electrical connector (1).
2. Important:
Twisting or tilting of the transmission control module electrical connector while disconnecting may result in bent or misaligned electrical terminal
pins.
Carefully disconnect the electrical connector (1) from the transmission control module.
3. Remove the transmission control module from the mounting bracket by pulling back on the retaining tabs (1) to release the control module.
Installation Procedure
1. Align the transmission control module with the locating pins (2) on the module mounting bracket.
2. Install the transmission control module by seating it fully into the bracket until all of the retaining tabs (1) have engaged the edge of the module
edge.
3. Important:
