SRX AWD V8-4.6L VIN A (2004)
Install the key lock side of the latch bezel (1) through the top of the seat back panel with the two plastic pins in the down position.
Install the bottom piece of the latch bezel with the tapered edge toward the top edge of the rear seat back panel as shown in the illustration above.
Install the two metal retainers, P/N 9428633, over the ends of the two plastic pins.
Tip
An 8 mm deep socket or nut driver may be used to fully seat the retainers.
Fully seat the two retainers.
Press the unlock button on the key FOB three times to enable the power folding seat.
Return the folding seat back to its original position.
Close the rear lift gate.
