SRX AWD V8-4.6L VIN A (2004)
Windshield Washer Switch: Service and Repair
WIPERS/WASHER SWITCH REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to SIR Caution in Service Precautions.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.
2. Remove the steering column trim covers.
3. Remove the steering column wiring harness tie straps.
4. Disconnect the electrical connectors (1, 3) from the windshield and washer switch.
5. Depress the locking tab (2) on the windshield wiper and washer switch (1) and remove the switch from the steering column.
INSTALLATION PROCEDURE
