SRX AWD V8-4.6L VIN A (2004)
Windshield Washer Reservoir: Service and Repair
WASHER SOLVENT CONTAINER REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood.
2. Remove the washer solvent container cap from the container.
3. Remove the lower air deflector.
4. Remove the front bumper fascia.
5. Remove the passenger side headlamp for LHD or the driver side headlamp for RHD.
6. Drain the solvent from the washer solvent container.
7. Disconnect the washer hoses from the washer pumps.
8. Disengage the electrical harness retainer clip from the washer solvent container.
9. Disconnect the electrical connectors from the washer pumps and washer solvent level sensor.
10. Remove the fasteners from the washer solvent container.
11. Guide the fill neck down through the radiator support.
12. Remove the washer solvent container from the vehicle.
