SRX RWD V6-3.6L (2007)
release tool cross reference in the Reference Guide of the J-38125 to ensure that the correct release tool is used.
6. Gently pry the plastic terminal retainer down and carefully pull the terminal out of the connector. Always remember never use force when pulling a
terminal out of a connector. If the terminal is difficult to remove, repeat the entire procedure.
Terminal Repair Procedure
Use the appropriate terminal and follow the instructions in the J-38125.
Yazaki Connectors (16-Way)
Yazaki Connectors (16-Way)
Tools Required
J-38125 Terminal Repair Kit
Removal Procedure
1. While depressing the lock, pull the two connector halves apart.
2. Use a small flat-blade tool to very carefully push the terminal position assurance (TPA) towards the face of the connector on both sides of the
