SRX RWD V8-4.6L VIN A (2006)
26. Using the J 43631, separate the ball stud from the steering knuckle.
27. Remove the yoke to shock retaining nut.
28. Remove the yoke to shock retaining bolt.
29. Remove the washer bottle to knuckle retaining bolts.
30. Remove the engine mount lower retaining nuts.
31. Install the J 39580 under the vehicle.
32. Lower the vehicle to the frame support table.
33. Remove the frame mounting bolts (1-3).
34. With the aid of an assistant, carefully raise the body from the frame.
35. Ensure when raising the body the following items are clear from the frame:
*
The brake pipes
*
The steering knuckle assembly
*
The wheel speed sensor electrical harness