SRX RWD V8-4.6L VIN A (2006)
2. Push the electrical connector and the wiring through the hole in the headliner.
3. Connect the electrical connector (1).
4. Position the plastic retainer (2) over the top of the electrical harness.
5. Align the fasteners to the holes in the sunshade metal integral clip (2).
Important: Do not pinch the wiring (3) when you install the fasteners.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the fasteners that secure the bezel (2) to the headliner.
Tighten the fasteners to 2 N.m (18 lb in).
7. Install the windshield pillar garnish molding.
8. Secure the sunshade to the sunshade rod retainer.