SRX RWD V8-4.6L VIN A (2006)
Luggage Carrier Rivet Nut Replacement
LUGGAGE CARRIER RIVET NUT REPLACEMENT
REMOVAL PROCEDURE
1. Remove the luggage carrier.
2. Drill through the luggage carrier rivet head using a 7.5 mm (0.295 in) drill bit.
CAUTION: Refer to Safety Glasses Caution in Service Precautions.
3. Remove the rivnut from the roof.
INSTALLATION PROCEDURE
1. Using a 10 mm (0.3937 in) drill bit, drill the rivet hex shape hole in the roof out to a round 10 mm hole.
2. Install a replacement rivnut to the hole in Sunroof/Moonroof using a rivnut tool, or equivalent.
3. Install the luggage carrier.
