SRX RWD V8-4.6L VIN A (2006)
6. Remove either the rear left or rear right sunroof rear window track (3).
7. Cut the tie straps securing the electrical harness to the return tubes. Discard the tie straps if necessary.
8. Release the return tube (1) from the motor/actuator block. Use a flat-bladed tool to release the return tubes.
9. Hold onto the motor block and gently pry the return tube from the motor block.
10. Carefully remove the return tube from the motor/actuator compartment.
INSTALLATION PROCEDURE
1. Position the return tube (2) to the motor block (3).
