SRX RWD V8-4.6L VIN A (2006)
8. Lower the rear track (4). Disconnect the rear track extension (2) from the track.
9. Remove the rear extension.
10. Disengage the sunshade drive tube from the track.
11. From the barrel end of the cable, carefully push the sunshade cable from the track.
12. Hold onto the barrel end of the cable. Pull the cable from the return and drive tube of the motor/actuator compartment.
13. Remove the sunshade cable from the vehicle.
INSTALLATION PROCEDURE
1. Position the sunshade cable (3) to the drive tube (2).
2. Push the sunshade cable through the tube into the motor/actuator compartment.
3. With the barrel end of the sunroof/sunshade cable, guide the cable into the rear track channel.
4. Inspect the position of the barrel on the opposite track to ensure the cables are in the same position.
