SRX RWD V8-4.6L VIN A (2006)
3. Measure the tracks side to side to ensure that the tracks are parallel.
4. Install the rear track screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 5 N.m (44 lb in).
5. Install the rear sunshade assembly.
6. Install the headliner.
7. Install the center and rear vent windows.
8. Perform the rear vent window sunshade initialization procedure. Refer to Sunroof Rear Window Initialization Process.
Sunroof Window Cable Assembly Replacement (Front)
SUNROOF WINDOW CABLE ASSEMBLY REPLACEMENT (FRONT)
REMOVAL PROCEDURE
1. Remove the center window panel (2).
2. Open the front sunroof window approximately 350 mm (14 in) just past the front air deflector.
3. Remove the front sunroof window.
4. Remove the headliner.
