SRX RWD V8-4.6L VIN A (2006)
6. Push the cable until the track reaches the drive tubes.
7. Install the drive tube retainer (3).
8. Position the track to the bottom of the sunroof frame.
9. Loosely install the track screws
10. Measure the tracks side-to-side to ensure that both tracks are parallel.
11. Secure the track to drive tube retainers.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 5 N.m (44 lb in).
12. Install the front sunshade assembly (3).
13. Install the headliner.
14. Install the front sunroof window.