SRX RWD V8-4.6L VIN A (2006)
1. Open the front sunroof window approximately 350 mm (13.7 in) to a point just past the air deflector in the full upright position.
2. Depress the weatherstrip seal in order to access the screw locations.
IMPORTANT: Do not damage the sunroof window weatherstrip seal when removing the screws.
3. Carefully remove the front sunroof to guide the assembly (2) shouldered screws (3).
4. Carefully remove the rear sunroof to rear cam lift arm screws (1).
5. With the aid of an assistant, lift upward from the side edges of the sunroof window.
6. With the aid of an assistant, remove the sunroof window, rearward from the top of the vehicle.