cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Procedures|Page 15685 > < Procedures|Page 15683
Page 3
background image

7. Install the front cam extension screws (3, 5).

Tighten the screws to 5 N.m (44 lb in)

8. Position the guide (2) even with the other track in order to install the front window.
9. Install the front, center, and rear vent windows.

Sunroof Front Track Extension Replacement

SUNROOF FRONT TRACK EXTENSION REPLACEMENT

REMOVAL PROCEDURE

1. Move the front sunroof window to the full open position.
2. Remove the headliner.
3. Remove the screws from the front track extension.
4. Loosen the 3 forward most screws from the front sunroof track.
5. Loosen the remaining track screws including the screw retaining the rear extension block to the sunroof cable drive tubes.

6. Flex the track downward in order to across the front extension track slot (1).
7. With a flat-bladed tool in the track slot (1), release the tab securing the front extension to the track (3)
8. Remove the front track extension (2).

INSTALLATION PROCEDURE

Procedures|Page 15685 > < Procedures|Page 15683