SRX RWD V8-4.6L VIN A (2006)
Head Rest: Technical Service Bulletins
Interior - 2nd Row Seat Center Head Rest Installation
Bulletin No.: 05-08-50-013
Date: October 28, 2005
INFORMATION
Subject:
Optional Second Row Center Headrest
Models:
2006 Cadillac SRX
The 2006 Cadillac SRX is not offering a second row center seat headrest from the plant. The seat assembly will still have all of the internal components
to accommodate a headrest. Some customers may opt to have this headrest installed. Follow the procedure below to install the headrest.
1.
Locate the two holes on the seat back foam.
2.
Use a sharp Exacto knife and cut a 20 mm (3/4") wide X in the center of the depression.
Important:
The small indicator hole on the pin should be facing inboard.
3.
Install the driver side (NON-BUTTON) guide pin.
Important:
The button should facing outboard.
4.
Install the passenger side (WITH BUTTON) guide pin.
5.
Install the headrest.
