SRX RWD V8-4.6L VIN A (2006)
Front Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Front Door Upper Auxiliary
Weatherstrip Replacement - Front Door Upper Auxiliary
Removal Procedure
1. Lower the window to the full down position.
2. Remove the power mirror.
3. Remove the window outer belt sealing strip.
4. Remove the screws (1, 3) from the front door upper auxiliary molding.
5. Remove the push-in fastener (2).
6. Remove the upper auxiliary molding.
Installation Procedure
1. Install the front door upper auxiliary molding onto the door frame.
2. Install the upper, rear, corner screw (3).
3. Install the push-in fastener (2) to the door.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the screws (1).
Tighten the screws (1, 3) starting at the rear and working forward to 2 N.m (18 lb in).
5. Install the outer belt sealing strip.
6. Install the power mirror.