SRX RWD V8-4.6L VIN A (2006)
2. Working downward along the front edge, install the weatherstrip on the door opening flange ensuring that the carrier is fully seated in the corners.
3. From the center pillar corner working rearward, install the weatherstrip along the roof rail and the rear of the door opening.
4. Using a rubber mallet, ensure that the weatherstrip is seated on the entire door opening flange.
5. Using a plastic trim stick or an equivalent, position the close-out lip over the interior trim around the door opening, or use the pull-string, on new
weatherstrip, under the close-out lip, in order to reposition the lip over the interior trim.
6. Install the carpet retainer.
