SRX RWD V8-4.6L VIN A (2006)
4. Important:
^
Ensure that the caliper guide pin boots (2) are fully seated to the caliper guide pin retaining seat (3) of the caliper guide pin.
^
Ensure that the caliper guide pin boots (2) are fully seated to the caliper boot seal retaining seat (1) of the brake caliper mounting bracket.
Install the caliper guide pin boots (2) to the brake caliper mounting bracket retaining seat (1).
5. Install the caliper guide pins (1) to the caliper mounting bracket (3).Ensure the caliper guide pin retaining seat is fully seated to the caliper pin boot
(2).
6. Carefully pull outward on the caliper guide pin (3) to ensure that the caliper guide pin retaining seat is fully seated to the caliper guide pin boot
(2).
7. Install the brake pad retainers (1) to the brake caliper bracket (3).
8. Install the brake pads (2) to the brake caliper bracket (3).
9. Install the brake caliper (1) to the front brake caliper bracket (2). Refer to Brake Caliper Replacement - Front.
