SRX RWD V8-4.6L VIN A (2006)
Yaw Rate Sensor: Service and Repair
Yaw Rate Sensor/Lateral and Longitudinal Accelerometer Replacement
Yaw Rate Sensor/Lateral and Longitudinal Accelerometer Replacement
Removal Procedure
1. Turn OFF the ignition.
2. To access the yaw rate sensor/lateral and longitudinal accelerometer move the passenger seat rearward.
3. Carefully lift the carpet by the seam.
4. Remove the 2 mounting nuts (2) that secure the accelerometer.
5. Disconnect the electrical connector (2) from the accelerometer.
6. Remove the accelerometer (1).
Installation Procedure