SRX RWD V8-4.6L VIN A (2006)
1. Install the auxiliary cooling fan assembly.
2. Install the auxiliary cooling fan assembly to condenser mounting bolts.
Tighten the bolts to 6.5 Nm (58 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Connect the auxiliary cooling fan assembly electrical connectors.
4. Install the front air deflector.
5. Install the front air deflector retainers.
6. Lower the vehicle.
7. Install the auxiliary cooling fan assembly to condenser upper mounting bolts.
Tighten the bolts to 6.5 Nm (58 inch lbs.).