SRX RWD V8-4.6L VIN A (2006)
1. Position the coolant heater power supply cord to the engine.
2. Route the coolant heater cord along the engine wiring harness conduit.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Connect the coolant heater cord to the coolant heater.
5. Secure the coolant heater cord clip to the coolant heater cord.
6. Lower the vehicle.
7. Secure the coolant heater cord clips to the following:
^
The engine wiring harness conduit
^
The engine oil level indicator tube
