SRX RWD V8-4.6L VIN A (2006)
Idler Pulley: Service and Repair
Drive Belt Idler Pulley Replacement
Removal Procedure
1. Remove the air conditioning, power steering and water pump drive belt.
2. Remove the drive belt idler pulley bolt.
3. Remove the drive belt idler pulley.
Installation Procedure
1. Install the drive belt idler pulley.
2. Install the drive belt idler pulley bolt.
Tighten the drive belt idler pulley bolt to 50 Nm (37 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the drive belt.
