SRX RWD V8-4.6L VIN A (2006)
Timing Chain: Service and Repair
Secondary Camshaft Drive Chain Replacement - Left
Secondary Camshaft Drive Chain Replacement - Left
Tools Required
^
J39946 Crankshaft Socket
^
EN 46328 Camshaft Holding Tool
Removal Procedure
1. Remove the right secondary timing chain.
2. Using the J39946, rotate the crankshaft until the primary timing gear alignment marks (1) are adjacent to each other as shown.
3. Remove the left camshaft position actuator housing. DO NOT remove the actuator solenoids from the housing.
4. Install the EN 46328 (1) on the bank 2 (left) camshafts (2).
Caution: Refer to Camshaft Holding Tool Caution in Service Precautions.
