SRX RWD V8-4.6L VIN A (2006)
Heat Shield: Service and Repair
Right
Exhaust Manifold Heat Shield Replacement - Right (LH2)
Removal Procedure
Caution:
Refer to Exhaust Service Caution in Service Precautions.
Caution:
Refer to Protective Goggles and Glove Caution in Service Precautions.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the wire clips from the generator and generator bracket.
3. Remove the bolts securing the exhaust manifold heat shield to the exhaust manifold.
4. Remove the heat shield from the engine.
Installation Procedure