SRX RWD V8-4.6L VIN A (2006)
Note:
Refer to Fastener Notice.
2.
Install the left air temperature actuator harness screw.
Tighten
Tighten the screws to 1 N.m (9 lb in).
3.
Connect the left air temperature actuator electrical connector to the actuator.
4.
Install the left air temperature actuator screws.
Tighten
Tighten the screws to 1 N.m (9 lb in).
5.
If equipped, install the adjustable accelerator pedal. Refer to Accelerator Pedal Assembly Replacement.
6.
Install the knee bolster bracket. Refer to Knee Bolster Bracket Replacement - Left.
7.
Install the knee bolster. Refer to Knee Bolster Replacement.
8.
Install the closeout panel. Refer to Closeout/Insulator Panel Replacement - Left.
Warranty Information