SRX RWD V8-4.6L VIN A (2006)
15. Disconnect the RF side impact module and pretensioner yellow connector from the vehicle harness yellow connector (1).
16. Remove the driver/left sound insulator from the I/P (2).
17. Remove the CPA from the steering wheel module coil yellow connector (1).
18. Disconnect the steering wheel module coil yellow connector (1) from the vehicle harness yellow connector (3).
19. Remove both CPA locks from the driver/LF side impact module and seat belt pretensioner yellow connector (1) located under the front of driver
seat.
20. Disconnect the LF side impact module and pretensioner yellow connector from the vehicle harness yellow connector (1).
21. Remove the left carpet retainer trim.
22. Remove the CPA (3) from the left/driver roof rail module yellow connector (2).
23. Disconnect the left roof rail module connector (2) from the left roof rail module (1).
ENABLING PROCEDURE
1. Remove the key from the ignition switch.