SRX RWD V8-4.6L VIN A (2006)
Dimmer Switch: Service and Repair
INSTRUMENT PANEL (I/P) DIMMER SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the front overhead console.
2. Remove the screws securing the I/P dimmer switch (3) the overhead console.
3. Disconnect the electrical connector.
4. Remove the switch.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the screws securing the I/P dimmer switch (3) the overhead console.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2 N.m (18 lb in).
3. Install the front overhead console.