SRX RWD V8-4.6L VIN A (2006)
Fog/Driving Lamp Bulb: Service and Repair
FOG LAMP BULB REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the lift gate applique.
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
2. Remove the fog lamp bulb socket (1) from the applique assembly by turning the socket counterclockwise and pulling the socket out.
3. Remove the fog lamp bulb from the socket.
INSTALLATION PROCEDURE
1. Install the fog lamp bulb into the socket.
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
2. Install the fog lamp bulb socket (1) into the applique assembly by inserting and twisting the socket clockwise.
3. Connect the electrical connector.
4. Install the lift gate applique.
