SRX RWD V8-4.6L VIN A (2006)
3. Connect the filler vent tube (2) to the EVAP hose.
4. Install the fuel filler tube brace bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the fuel filler tube brace bolt to 9 N.m (80 lb in).
5. Install the bolts securing the fuel filler tube to the body.
Tighten the fuel filler tube bolts to 3.5 N.m (31 lb in).
6. Install the right rear wheelhouse liner.
7. Install the right rear wheel.
8. Add fuel to the fuel tank.
9. Inspect for fuel leaks.
10. Install the fuel filler cap.