SRX RWD V8-4.6L VIN A (2006)
3. Remove the MAF/IAT sensor screws.
4. Carefully remove the MAF/IAT sensor from the air cleaner housing cover.
NOTE:
-
Handle the MAF sensor carefully.
-
Do not drop the MAF sensor in order to prevent damage to the MAF sensor.
-
Do not damage the screen located on the air inlet end of the MAF.
-
Do not touch the sensing elements.
-
Do not allow solvents and lubricants to come in contact with the sensing elements.
-
Use a small amount of a soap based solution in order to aid in the installation.
5. Discard the MAF/IAT sensor gasket.
INSTALLATION PROCEDURE
1. Install a NEW MAF/IAT sensor gasket.
NOTE:
-
Handle the MAF sensor carefully.
-
Do not drop the MAF sensor in order to prevent damage to the MAF sensor.
-
Do not damage the screen located on the air inlet end of the MAF.
-
Do not touch the sensing elements.
-
Do not allow solvents and lubricants to come in contact with the sensing elements.
-
Use a small amount of a soap based solution in order to aid in the installation.
2. Carefully install the MAF/IAT sensor into the air cleaner housing cover.
3. Install the MAF/IAT sensor screws.